3M Scotch super 33+ vinyl electrical black tape

1.black tape 2.certificate: UL510/CSA/ROHS 3.SGS test 4.3M brand/ made in USA 5.0.18mm*19mm*20m

3M Scotch super 33+ vinyl electrical black tape 

Product Description:

Scotch Super 33+ Vinyl Electrical Tape is a premium grade, 7 mil thick, all–weather vinyl-insulating tape. It is designed to perform continuously in ambient temperatures up to 105°C (220°F). The tape is conformable for cold weather application down to –18°C (0°F). It has excellent resistance to abrasion, moisture, alkalies, acids, corrosion and varying weather conditions (including ultraviolet exposure).

•UL Listed; UL 510 Standard “Insulating Tape” (product category OANZ), File E129200

•CSA Certification; Standard C22.2 No.197–M1983 “PVC Insulating Tape,” File LR 48769

•Polyvinyl chloride (PVC) backing.•Pressure–sensitive rubber based adhesive.•Compatible with solid dielectric cable insulations.•Compatible with rubber and synthetic splicing compounds, as well as epoxy and polyurethane resins.•Inhibits corrosion of electrical conductors.Applications:•Primary electrical insulation for all wire and cable splices rated up to 600 volts and 105°C (220°F).•Primary electrical insulation for 600 volt bus applications, and protective jacketing for low and high voltage bus.•Protective jacketing for high voltage cable splices and repairs.•Harnessing of wires and cables.

Typical Data / Physical Properties:Temperature Rating:UL 510                 80°C (176°F)CSA   C22.2 No. 197–M1983Handling Continuous –18°C (0°F)Operation               105°C (220°F)Color                    Black tapeThicknessASTM D1000           7 milsAdhesion to SteelASTM D100022°C (72°F)            28 oz./in.–18°C (0°F)           60 oz./in.Adhesion to BackingASTM D100022°C (72°F)             25 oz./in.–18°C (0°F)            60 oz./in.Breaking StrengthASTM D100022°C (72°F)             15lbs./in.

Ultimate Elongation  ASTM D100022°C (72°F)             250%–18°C (0°F)            100%Flammability (Maximum)UL 510                    1 sec.ASTM D1000            4 sec.Accelerated AgingASTM D1000           80%FlaggingASTM D1000           <0.1 inchTelescoping24 Hours @ 50°C(120°F). <0.1 inchElectrical Properties:Voltage RatingUL 510                600VDielectric StrengthASTM D1000        Standard Condition 1150 V/mil High Humidity 90% of std.Insulation ResistanceASTM D1000         >1 x106 megohms (High Humidity Method)Note: These are typical values and should not be used for specification purposes.

Installation Techniques:The tape shall be applied in half–lapped layers with sufficient tension to produce a uniform wind (for most applications this tension will reduce the tape’s width to approximately 5/8 of its original width). On pigtail splices, the tape shall be wrapped beyond the end of the wires and then folded back, leaving a protective cushion to resist cut– through. Wrap tape up–hill, taping from a smaller diameter surface to a larger diameter surface. Apply the tape with no tension on the last wrap to prevent flagging.

3M Scotch super 33+ vinyl electrical black tape